bat54-v, bat54a-v, bat54c-v, bat54s-v document number 85508 rev. 1.7, 16-jul-10 vishay semiconductors www.vishay.com 1 top vie w top vie w bat54-v bat54c-v bat54a-v bat54s-v 1 8 034 1 3 1 3 1 3 1 2 2 2 2 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal schottky diodes, single and dual features ? these diodes feature very low turn-on voltage and fast switching ? these devices are protected by a pn junction guard ring against excessive voltage, such as electrostatic discharges ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: sot-23 weight: approx. 8.8 mg packaging codes/options: gs18/10k per 13" reel (8 mm tape), 10k/box gs08/3k per 7" reel (8 mm tape), 15k/box parts table absolute maximum ratings t amb = 25 c, unless otherwise specified note 1) device on fiberglass substrate, see layout on next page. thermal characteristics t amb = 25 c, unless otherwise specified note 1) device on fiberglass substrate, see layout on next page. part ordering code type marking remarks bat54- v bat54- v -gs18 or bat54- v -gs08 l4 tape and reel bat54a- v bat54a- v -gs18 or bat54a- v -gs08 l42 tape and reel bat54c- v bat54c- v -gs18 or bat54c- v -gs08 l43 tape and reel bat54s- v bat54s- v -gs18 or bat54s- v -gs08 l44 tape and reel parameter test condition symbol v alue unit repetitive peak reverse voltage v rrm 30 v forward continuous current i f 200 1) ma repetitive peak forward current i frm 300 1) ma surge forward current current t p < 1 s i fsm 600 1) ma power dissipation p tot 230 mw parameter test condition symbol v alue unit thermal resistance junction to ambient air r thja 430 1) k/w junction temperature t j 125 c storage temperature range t stg - 65 to + 150 c
www.vishay.com 2 document number 85508 rev. 1.7, 16-jul-10 bat54-v, bat54a-v, bat54c-v, bat54s-v vishay semiconductors for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com electrical characteristics t amb = 25 c, unless otherwise specified layout for r thja test thickness: fiberglass 1.5 mm (0.059 in.) copper leads 0.3 mm (0.012 in.) typical characteristics t amb = 25 c, unless otherwise specified parameter test condition symbol min. ty p. max. unit reverse breakdown voltage i r = 100 a (pulsed) v (br) 30 v leakage current pulse test t p < 300 s, < 2 % at v r = 25 v i r 2a forward voltage i f = 0.1 ma, t p < 300 s, < 2 % v f 240 m v i f = 1 ma, t p < 300 s, < 2 % v f 320 m v i f = 10 ma, t p < 300 s, < 2 % v f 400 m v i f = 30 ma, t p < 300 s, < 2 % v f 500 m v i f = 100 ma, t p < 300 s, < 2 % v f 800 m v diode capacitance v r = 1 v , f = 1 mhz c d 10 pf reverse recovery time i f = 10 ma to i r = 10 ma, i r = 1 ma, r l = 100 t rr 5ns 17451 15 (0.59) 12 (0.47) 0. 8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0. 8 ) 2 (0. 8 ) 1.5 (0.06) 5.1 (0.2) figure 1. typical forward v oltage forward current vs. v arious temperatures 1 88 67 1000 100 10 1 0.1 0.01 i - for w ard c u rrent (ma) f 00.4 0.6 1.2 1.4 0. 8 1 0.2 v f - for w ard voltage (v) = 125 c t j 25 c - 40 c figure 2. diode capacitance vs. reverse v oltage v r 1 88 6 8 10 14 12 2 4 0 0 4 12 16 20 24 2 8 c - typical capacitance (pf) d v r - re v erse voltage (v) 6 8 8
bat54-v, bat54a-v, bat54c-v, bat54s-v document number 85508 rev. 1.7, 16-jul-10 vishay semiconductors www.vishay.com 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): sot-23 figure 3. typical v ariation of reverse current vs. v arious temperatures 100 1000 10 1 0.1 0.01 5101520 02530 v r - re v erse voltage (v) i - re v erse c u rrent ( a) r 1 88 69 = 125 c t j 100 c 75 c 50 c 25 c foot print recommendation: rev. 8 - date: 23.sept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
